Electro Hydraulic Motion Controls, Proportional and Servo Valves

Hazardous Pressure Transducers from NoShok


619 / 620 SERIES

ATEX APPROVED EXPLOSION PROOF PRESSURE TRANSMITTERS
 

    • ATEX approved II 2G Ex d II C
    • For dynamic and static measurements
    • Excellent repeatability
    • High accuracy and long term stability
    • Increased accuracy of ±0.125% full scale (BFSL)
    • Excellent overload protection
    • Wide variety of pressure ranges
    • Corrosion-resistant stainless steel design
    • Welded pressure connection and measuring cell for exceptional shock and vibration resistance
    • CE compliant to suppress RFI, EMI, and ESD

 



621 / 622 SERIES

EXPLOSION PROOF PRESSURE TRANSMITTERS

    • Designed for applications that require pressure measurement in hazardous locations
    • Accuracy to ±0.25% full scale (BFSL)
    • Wide variety of pressure ranges available
    • Advanced diffused semi-conductor and sputtered thin film sensor for maximum stability
    • Available with a standard threaded connection as well as a flush diaphragm configuration
    • Welded 316 stainless steel, and Elgiloy construction with no internal o-rings, gaskets or seals
    • 1/2" NPT conduit connection
    • Low power voltage outputs available
    • Incorporate significant levels of RFI, EMI, and ESD protection
    • CE compliant to suppress RFI, EMI, and ESD
    • Factory Mutual and Canadian Standards approved
    • NACE MR0175/ISO 15156 compliant
    • ANSI/ISA-12.27.01-2003 approved single seal

 

 


623/624 SERIES

NON-INCENDIVE PRESSURE TRANSMITTERS

    • Designed for applications that require pressure measurement in hazardous locations
    • Accuracy to ±0.25% full scale (BFSL)
    • Wide variety of pressure ranges available
    • Advanced diffused semi-conductor and sputtered thin film sensor for maximum stability
    • Available with a standard threaded connection as well as a flush diaphragm configuration
    • Welded 316 stainless steel with no internal o-rings, gaskets or seals - optional Hastelloy
      C4 on flush diaphragm model
    • 1/2" NPT conduit connection
    • Zener barriers are not required to meet non-incendive approval
    • CE compliant to suppress RFI, EMI, and ESD
    • NACE MR0175/ISO 15156 compliant
    • ANSI/ISA-12.27.01-2003 approved single seal
    • Factory Mutual & Canadian Standards Association Approved

 

 


625/626 SERIES

INTRINSICALLY SAFE PRESSURE TRANSMITTERS

    • Designed for applications that require pressure measurement in hazardous locations
    • Accuracy to ±0.125% Full Scale (BFSL)
    • Wide variety of pressure ranges available
    • Advanced diffused semi-conductor and sputtered thin film sensor for maximum stability
    • Available with a standard threaded connection as well as a flush diaphragm configuration
    • Welded 316 stainless steel with no internal o-rings, gaskets or seals - optional Hastelloy C4 on flush diaphragm model
    • Entity approved for use with all approved Zener barriers where required
    • CE compliant to suppress RFI, EMI, and ESD
    • ANSI/ISA-12.27.01-2003 approved single seal
    • Factory Mutual & Canadian Standards Association approved

 

 

 


628 SERIES

INTRINSICALLY SAFE HAMMER UNION PRESSURE TRANSMITTERS

    • Ranges from 0 psig to 5,000 psig through 0 psig to 20,000 psig
    • 4 mA to 20 mA, 2-wire output signal
    • Inconel X-750 diaphragm and connection
    • Canadian Standards Association approved
    • NACE MR0175/ISO 15156 compliant
    • Every sensor comes with a Certificate of Calibration
    • Certifications pending:  Factory Mutual, ATEX, and CE