Electro Hydraulic Motion Controls, Proportional and Servo Valves

Proportional Directional Control Valves from Continental Hydraulics

VED03M
VEDO 3M

PROPORTIONAL DIRECTIONAL CONTROL VALVES WITHOUT ON-BOARD CONTROL

Mounting Surface NFPA D03 (ISO 4401-03-02-0-05)

Max Pressure 5000 PSI (350 bar)

Flow Rate 7 gpm (26 l/min)

 

Continental Hydraulics VED03M direct operated 4-way proportional valves conform to NFPA D03 and ISO 4401 mounting standards.  These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valves’ performance.  A variety of manual overrides are also available.

 

 


VED05M
VEDO 5M

PROPORTIONAL DIRECTIONAL CONTROL VALVES WITHOUT ON-BOARD CONTROL

Mounting Surface NFPA D05 (ISO 4401-05-04-0-05)

Max Pressure 4600 PSI (320 bar)

Flow Rate 16 gpm (60 l/min)

 

Continental Hydraulics VED05M direct operated 4-way proportional valves conform to NFPA D05 and ISO 4401 mounting standards.  These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valve performance.  A variety of manual overrides are also available.

 

 

VED0M
VEDO *M

PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES WITHOUT ON-BOARD CONTROL

Sizes  DO5H thru D10 Size

Max Pressure 5000 PSI (350 bar)

Max Flow Rate 420 gpm (1600 1/min)

 

Continental Hydraulics VED*M pilot operated 4-way proportional valves conform to NFPA and ISO 4401 mounting standard.  These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valves performance.  A variety of manual overrides and a version with a pressure reducing valve are also available.

 

 

VED03MG
VEDO 3MG

PROPORTIONAL DIRECTIONAL CONTROL VALVE WITH ON BOARD ELECTRONICS

Mounting Surface NFPA D03 (ISO 4401-03-02-0-05)

Max Pressure 5000 PSI (350 bar)

Flow Rate 7 gpm (26 l/min)

 

Continental Hydraulics VED03MG direct operated 4-way proportional valves with On-Board Digital Amplifier conform to NFPA D03 and ISO 4401 mounting standards.  These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed via software to customize the parameters based on your application needs.  A variety of manual overrides are also available.

 

 

VED05MG
VEDO 5MG

PROPORTIONAL DIRECTIONAL CONTROL VALVES WITH ON BOARD ELECTRONICS

Mounting Surface NFPA D05 (ISO 4401-05-04-0-05)

Max Pressure 4600 PSI (320 bar)

Flow Rate 16 gpm (60 l/min)

 

Continental Hydraulics VED05MG direct operated 4-way proportional valves with On-Board Digital Amplifier conform to NFPA D05/ISO 4401-05 mounting standards.  These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed via software to customize the parameters based on your application needs.

 

 

VED0MG
VEDO *MG

PILOT OPERATED DIRECTIONAL CONTROL VALVES WITH ON BOARD ELECTRONICS

Sizes D05H thru D10

Max Pressure 5000 PSI (350 bar)

Max Flow Rate 420 gpm (1600 l/min)

 

The VED*MG pilot operated 4-way proportional valves with On-Board Digital Amplifier are available in 5 standard NFPA and ISO patterns.  The VED*MG valves are designed to control the direction and oil flow rate based on the amount of command signal supplied to the OnBoard Amplifier.  In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed, via software, to customize the parameters based on your application needs.

 

 

VED03MJ
VEDO 3MJ

DIRECTIONAL CONTROL VALVES WITH ON BOARD ELECTRONICS & POSITION FEEDBACK

Mounting Surface NFPA D03 (ISO 4401-03-02-0-05)

Max Pressure 5000 PSI (350 bar)

Flow Rate 8 gpm (30 l/min)

 

Continental Hydraulics VED03MJ direct operated 4-way proportional valves with On-Board Digital Amplifier and Spool Position sensing, conform to NFPA D03/ISO 4401 mounting standards.  These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to thecenter position.  This Valves series is also available with a Fail-Safe option. The Spool Position Sensor circuit improves the overall valve performance by reducing hysteresis and improving response times.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance.  In-field adjustments can be performed via software to customize the parameters based on your application needs.

 

VED05MJ
VEDO 5MJ

DIRECTIONAL CONTROL VALVES WITH ON BOARD ELECTRONICS & POSITION FEEDBACK

Mounting Surface NFPA D05 (ISO 4401-05-04-0-05)

Max Pressure 4600 PSI (320 bar)

Flow Rate 20 gpm (75 l/min)

 

Continental Hydraulics VED05MJ direct operated 4-way proportional valves with On-Board Digital Amplifier and Spool Position sensing, conform to NFPA D05 and ISO 4401 mounting standards.  These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  This Valves series is also available with a Fail-Safe option.  The Spool Position Sensor circuit improves the overall valve performance by reducing hysteresis and improving response times.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance.  In-field adjustments can be performed via software to customize the parameters based on your application needs.

 

 

VED08MJ
VEDO *MJ

PILOT OPERATED DIRECTIONAL CONTROL VALVES WITH ON BOARD ELECTRONICS & FEEDBACK

Sizes D05H thru D10

Max Pressure 5000 PSI (350 bar)

Max Flow Rate 210 gpm (800 l/min)

 

Continental Hydraulics VED*MJ pilot operated 4-way proportional valves with On-Board Digital Amplifier and Spool Position sensing, conform to NFPA and ISO 4401:2005 (CETOP RP 121H) mounting standards.  These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.  The Spool Position Sensor circuit improves the overall valve performance by reducing hysteresis and improving response times.  The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed via software to customize the parameters based on your application. The valves with internal pilot are available also with a pressure reducing valve.